Profesionāla būvmateriālu komplektācija un pārdošana Baltijas valstīs
Jumta paneļi ir paredzēti jumta segumam. Tiem ir raksturīga ļoti dziļa trapecveida ārējā apšuvuma profilēšana. Tas ir saistīts ar ilgstošas ekspluatācijas slodzes pārraidi. Plātnes ar skrūvēm piestiprina pie koka, tērauda vai dzelzsbetona konstrukcijas.
The minimum roof pitch is 3 ° (5.2%) without skylights and 5 ° (8.7%) for covering panels joined along their length. The plate cladding is galvanized steel sheet on both sides according to EN 10346 with organic polyester varnish with a coating thickness of 25 μm.
Paneļa modulārais platums ir 1000 mm, un tā standarta garumi ir no 2,0 m līdz 12,0 m.
Pēc īpaša klienta pieprasījuma mēs piegādājam paneļus, kas ir īsāki par 2,0 m un garāki par 12,0 m, ar maksimālo garumu 16,5 m.
PIR D MAX
Polyisocyanurate roof panel
PIR D MAX roof panels are designed for roofing. They are characterized by a very deep profiling of the trapezoidal outer cladding. This is related to the transmission of long-term service loads. The boards are fastened with screws to the wooden, steel or reinforced concrete structure. The minimum roof pitch is 3 ° (5.2%) without skylights and 5 ° (8.7%) for covering panels joined along their length. The plate cladding is galvanized steel sheet on both sides according to EN 10346 with organic polyester varnish with a coating thickness of 25 μm. The modular width of the panel is 1000 mm, and its standard lengths range from 2.0 m to 12.0 m. On special customer request, we supply panels shorter than 2.0 m and longer than 12.0 m, with a maximum length of 16.5 m. The tightness of panel joints is ensured by the PUS polyurethane gasket applied at the production stage.
-
The profiling of the metal cladding makes the walls look aesthetically pleasing
-
A large radius of cladding profiling ensuring the integrity of the protective coatings
-
Continuous polyurethane gasket applied during the production process
-
Protection chamber against water capillary action
-
Core made of rigid PIR foam with very good thermal insulation and fire properties
-
Contoured edges facilitate assembly and increase thermal insulation
-
Continuous polyurethane gasket maintaining high thermal insulation. It was applied during the production process
-
Aluminum foil prevents the penetration of water vapor into the core of polyisocyanurate foam
Impact of external fire on the roof - BROOF
Moduļa platums - 1000mm
Max. garumus - 16,5m
PROFILĒJUMS:
Ārējais profilējums: Trapezoidal
Iekšējā profilējums:: Linear, Flat
KRĀSAS
Standarta ārējās apdares krāsas
RAL 3000
RAL 8017
RAL 5010
RAL 9002
RAL 6011
RAL 9006
RAL 7016
RAL 9007
RAL 7035
RAL 9010
Standarta iekšējās apdares krāsas
RAL 9002
RAL 9010
USAGE
ROOF MADE OF SANDWICH PANELS - RIDGE
A wide range of typical flashings, as well as the possibility of performing machining according to an individual project and the availability of a range of complementary accessories allows you to make a tight cover, resistant to weather conditions and highly aesthetic.
-
PIR sandwich panel D
-
Construction screw + calotte
-
Roof ridge flashings
-
Roof flashing
-
Construction of the object
ROOF MADE OF SANDWICH PANELS - SLOPE
The use of PIR D sandwich panels with a trapezoidal top cladding allows a roof covering capable of supporting both dead weight and climatic loads to be carried out in a short time. In addition, high thermal insulation and low curb weight optimize the building structure.
-
PIR sandwich panel D
-
Construction screw + calotte
-
Roof flashing
-
Construction of the object
ROOF MADE OF SANDWICH PANELS - HOOD
-
PIR sandwich panel D
-
Construction screw + calotte
-
Hood flashing
-
Roof flashing
-
Construction of the object
Additional services offered (e.g. execution of the so-called "undercutting" with the option of removing foam and bottom cladding in the factory), availability of dedicated assembly accessories and the possibility of recommending experienced assembly teams are undoubted ours advantages which allow us to meet the growing market requirements.
PAPILDUS MATERIĀLI
GASKETS AND OTHER ACCESSORIES
-
Gaskets for sandwich panels
-
Sealing flanges intended for passage of ducts (e.g. ventilation) through the casing made of sandwich panels
-
Bushings - washers for cold plates
We supply adhesive, polyurethane (PUS and PURS), polyethylene (PED) and butyl sealing tapes
SELF DRILLING SCREWS:
-
for hot rolled construction (wall thickness from 3 to 12 mm)
-
for cold-bent construction (thickness from 1.5 mm to 5 mm)
On special order it is possible to provide caps or connectors in the color of the outer cladding of the sandwich panel. Panels can be joined to steel, reinforced concrete and wooden constructions using dedicated fasteners. Detailed information on connectors can be found in our technical catalogues.
FLASHINGS
-
Length: 3000 mm or 6000 mm
-
Material: galvanized steel sheet
-
Protective coating: polyester varnish
-
Additional protection: foil
Manufacturer has a profiling machine that allows bending of 1.25 mm thick sheet metal (maximum length of 6 m), in typical shapes from the catalog and according to the individual design of the customer. Detailed information on sheet thickness and colors can be found in the catalog dedicated to a specific panel.
The flashings are protected against damage by foiling the top side. Detailed data is available in the section "For designers - flashing"
Steel flashing are part of the insulation panel system - Sandwich Panels.
Additionally, they are used as a separate decorative element.
Steel flashing is made of galvanized metal sheet with a thickness of 0.5 mm, 0.7 mm and 1.0 mm, colors according to the RAL palette.
Standard length of metal flashing sheet is 6.0 m.
Sazinieties ar mums, lai iegūtu sīkāku informāciju par konkrētu paneļu biezumu, laidumu un pielietojuma veidu.